The Taper Mount Direct Thread Adaptor provides a direct thread interface for taper mounted suppressors. Two units of wrench flats generate 
it equally simple to attach or take away from the suppressor or your firearm’s muzzle threads. No proprietary tools required. Obtainable in 1/2×28 and 5/8×24 with 18x1mm support just around the corner. While it is practical to have immediate thread suppressor capacity that can move from host to host without the need for extra muzzle products, it is crucial to remember that all host firearm should be checked for baffle alignment via visual inspection before firing.
The 1/2×28 Insert works extremely well with cartriges up to 30 caliber and the 5/8×24 can be used up to .338 caliber.
The use of direct thread adaptors improves on immediate thread mounted Taper Adapter suppressors, by allowing the finish user to have modular thread pitches. One Taper Attach Suppressor to Rule Them All.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for each contingency
Taper Attach Repeatability and Stability
Multi-Thread versatility for your Taper Install Suppressor
taper adapters allow the application of holders or equipment with a different machine-side taper then your equipment spindle taper, such as by using a BT40 tapping chuck on a 50-taper spindle.
These adapters get rid of lead time losses in the event of a machine breakdown. Adapters may also help in testing custom equipment on another machine compared to the planned production machine.
Taper adapters avoid the necessity for a way to obtain new holders or tools for a specific machine. They arrive ready to employ with built-in locked clamping mechanisms featuring a clamping screw on a ball bearing for steep taper clamping or HSK locking device for taper clamping.
The steep taper may be the standardised form of an instrument taper for clamping tools in the primary spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (in contrast with the Morse taper), thereby making tool alterations easier without clamping. This is especially significant for automated tool changes
Tiny clamping travel equals short clamping time
High torsional rigidity as a result of short distance between your leading edge and spindle bearing (short overall length)
For adapting morse taper equipment to milling devices that take R8 tools
Alloy steel hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Equipment More taper lowering sleeve can be used to convert your headstock via #2 MT to #1 MT. This is useful in case you have a travel centre or pen mandrel which is usually 1MT as well as your headstock is 2MT