Sheave pulley

Sheaves are grooved tires or pulleys used in combination with rope or perhaps chain to change the direction and point of request of pulling power. There are numerous types of products. Quite often, suppliers categorize sheaves by resources of construction. For instance, some sheave manufacturers bring cast iron, machined steel, or stamped metal sheaves. Cast iron sheaves can provide from 30,000 to 65,000 pounds of tensile strength and are designed to withstand large side-loads. Belt slippage is certainly reduced to increase power transmission at total speed. Steel sheaves will be lighter than cast iron sheaves, but not as strong.

Products without rivets or place welds provide better durability, concentricity, toughness and run-away control than stamped steel shaves. Machined metal sheaves are impact-resilient and manufactured from bar stock products. Sheave suppliers that categorize items by features or capabilities may provide V-ribbed sheaves with smaller sized belt and groove sections. The products provide smoother and quieter operation than other styles of sheaves, and are made to maintain surface contact with the belt so as to maximize power transmission. Selecting sheaves needs an examination of product technical specs, the type of belt or groove to be utilized, bore sizes and types, and estimated annual usage.
Product Specifications
Product features include sheave length and height, maximum cable outer diameter (OD), maximum sheave OD, minimum bending radius, maximum sheave width, shaft diameter, maximum line pressure, and pulling radius. Measurements such as height, width, and outer diameter are measured in English products such as ins (in) or metric units such as centimeters (cm). Maximum brand tension is normally measured in either pounds (lbs) or kilograms (kg). Pulling radius is specific by number of degrees. Generally, scaled-down groove sections minimize distortion and improve the arc of speak to. Sheaves that are suitable for sole grooves or twice groove are commonly readily available. Both types are designed for certain belt sizes and cross sections and could have set, tapered or splined bored. Prevalent groove styles involve O, A, B and A/B. Belt cross sections incorporate cross sections H, J, K. L, and M.
Applications and Industries
Sheaves are used in a number of applications and industries. Hooked hangar shaves have a hinged yoke for the installation and removal of fiber optic cable. They are often tied off to steer a cable into a duct, or used in combination with an alignment arm to facilitate cable removing. Cable feeding sheaves plug into a conduit, usually within a manhole wall structure, in order to lead the cable in to the conduit whatever the pulling angle. Sheave suppliers may also sell part cable guides, heavy duty quad blocks, fiber optic hangar blocks, 3-sheave cable manuals, fiber optic sheave mounts, and jamb skids.
V-belt pulleys (also called vee belt sheaves) will be devices which transmit vitality between axles by the use of a v-belt a mechanical linkage with a trapezoidal cross-section. Together the unit give a high-speed power transmitting solution that is resistant to slipping and misalignment.

V-belt pulleys are solely used for transmitting electric power between two parallel axels. The most notable difference between a v-belt pulley and other types of pulleys (circular etc.) will be the geometry of the groove or grooves located around the circumference of the pulley; these grooves lead and gain traction on a v-belt. The accompanying online video offers a comprehensive overview of some v-belt essentials, in addition to their advantages and variations.
A v-belt is a distinctive mechanical linkage with a cross-section that resembles an isosceles trapezoid. The v-belt and its complementing pulley make the most efficient belt drive known (sometimes achieving 98% transmission productivity). V-belts were designed in the first days of automobile development to improve belt reliability and torque transmission from the crankshaft to rotating assemblies. V-belts remain a common type of serpentine belt today.
V-belt transmissions certainly are a notable update from round or toned belt transmissions; v-belts give excellent traction, speed, and load functions, while enjoying an extended service life with simple replacement. Heavy loads actually increase transmission efficiency since they wedge the belt additional into the pulley’s groove, therefore improving friction. Typically, v-belt drives operate between 1,500 to 6,000 ft/min, with 4,500 ft/min the ideal capacity for standard belts. Some narrow v-belts can operate at speeds of up to 10,000 ft/min, but these pulleys must be dynamically stabilized. V-belt pulleys may be positioned in a side-by-aspect configuration or a single pulley may feature multiple grooves around the circumference so that you can accommodate a multiple-belt travel. This type of drive distributes torque across a lot of belts and a mechanical redundancy.
V-belt drive advantages V-belt drive disadvantages
Minimal maintenance w/ not any lubrication Approx. temperature limit of 140° F
Extremely reliable Pulleys must be somewhat bigger than in other belt drives
Gradual wear, which is normally easily identified Middle distance between pulleys is limited (no more than 3x the diameter of the largest pulley
Wide horsepower and rate range Usually more expensive than other drives
Quiet operation Simply acceptable for parallel shafts
Vibration dampening
Prevents overload


China Coupling Co., Ltd.

Mail: [email protected]

As one of leading Couplings manufacturers, suppliers and exporters of mechanical products, We offer Coupling and many other products.
Please contact us for details.

Recent Posts