This Ruland setscrew shaft collar is made of aluminum. It really is a setscrew-type shaft collar for applications helping low axial loads and simple positioning. Setscrew collars possess improved holding power when the shaft materials is softer than the setscrew material. It really is made of aluminum for resistance to corrosion and tarnishing and is lightweight for use in applications where material weight is a factor. This collar comes with a forged setscrew for securing the collar onto the shaft. The operating temperature ranges for this collar range between -40 to 107 degrees C (-40 to 225 degrees F). This shaft collar is ideal for use in a variety of applications, including in the automotive industry to situate elements in vehicle power steering assemblies, the production industry to locate components on a conveyor belt system, and the hobby craft market to hold tires on axles in remote control vehicles, among others.
Shaft collars are ring-shaped devices mainly used to secure components onto shafts. In addition they provide as locators, mechanical stops, and spacers between additional components. The two fundamental types of shaft collars are clamping (or split) collars, that can come in one- or two-piece designs, and setscrew collars. In both types, a number of screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars should be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and may be installed between parts on the shaft. Shaft collars are manufactured from a wide selection of materials including zinc-plated steel, aluminum, nylon, and neoprene. Within nearly every type of machinery and market, shaft collars are found in applications including gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical devices, and paper and metal mill equipment, among others.
Ruland manufactures shaft collars, rigid couplings, and zero-backlash movement control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The company, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.
· Setscrew shaft collar for applications assisting low axial loads and simple positioning
· 
Effective on shafts manufactured from softer material compared to the setscrew material
· Aluminum for resisting corrosion and tarnishing
· Includes a forged setscrew for securing the collar onto the shaft
· Operating temperatures range between -40 to 107 degrees C (-40 to 225 degrees F)
When you require to replace your existing flagpole flash collar this 2 piece collar makes installation easy. You don’t need to remove the pole or to go over the very best of the pole. This 2 piece cast light weight aluminum collar includes a hidden hinge underneath the collar therefore no rivets or screws are in view.
The heavy-duty 2 piece Cast Aluminum Collars is the most durable collar offered in the industry today! Cast from Aluminum Alloy, these 1/4″ solid cast collars are created to withstand the harshest of environments. replacement or addition to an existing flagpole.
I.D. around 1/8″ wider than Butt Diameter.
Light weight aluminum Decorative Pipe Collar – 5 inch Gas Type: Gas, Liquid Propane. Inner Diameter: 5″. Width: 10.625″. Double Wall Construction. UL Listed. This Decorative Pipe Collar for 5 In . Type B Pipe from the Round Gas Vent series can be a Type B gas component and consists of the duralock system for a tight seal. This pipe collar can be an optional accessory. It is to be utilized for decorative reasons. EPT Type B Gas Vent is designed to meet the rugged demands of the work site. The inner wall structure is recessed to eliminate damage in managing. EPT’s innovative system for a lock-restricted connection for Type B Gas Vent called DuraLock. Start to see the alignment indicators fulfill; feel the ends grasp with each other; hear the snap as the bond firmly locks into place. Type B gas vents are not suitable for use with wood-burning up or coal applications, industrial ovens, exhaust ranges and hoods, grease or pollution ducting, or as aluminum collar china free-standing up exhaust vents for high temperature applications. Type B Gas Vent has been engineered to high temperature up quickly. It remains hot during the operation of the applying with reduced condensation in the appliance and vent program. Pipe lengths are available in multiple lengths, 6 to 60 in ., with a full complement of adjustable and rigid fittings. Looking for Simpson Dura-Vent? You found it! Simpson Dura-Vent has transformed their name to EPT. EPT is a recognized technological leader in the venting market. Consistently the first to marketplace with new improvements in venting systems, EPT offers captured a leadership placement in emerging markets. EPT has patents for several items and continues to create secure and technologically advanced venting. The company’s research into solving issues with corrosion, when biofuels such as corn are used, resulted in the break-through patent for PelletVent Pro. Scientifically confirmed materials and unequalled engineering make EPT items not only the best choice, or safest choice, however the only choice for professional quality venting products.
When you need to replace your existing flagpole flash collar this 2 piece collar makes installation easy. No need to remove the pole or to go over the very best of the pole. This 2 piece cast aluminum collar includes a hidden hinge underneath the collar therefore no rivets or screws are in view.
The heavy-duty 2 piece Cast Aluminum Collars is the the majority of durable collar offered in the industry today! Cast from Light weight aluminum Alloy, these 1/4″ thick cast collars are created to endure the harshest of environments. replacement or addition to a preexisting flagpole.
Our spun aluminium flash collar is an ornamental covering that provides a finished turn to the bottom of the flagpole. It also conceals and helps protect your surface sleeve from the elements. Prices proven below are for the standard bright satin finish. Our flash collars are also obtainable in anodized and other finishes upon request. Please call for availability and pricing.
The Design B Spun Collar is our most popular style flash collar for shoe foundation flagpoles and is manufactured to exacting specs from the best quality components. This flash collar provides the perfect finishing contact for your flagpole. For Use With Shoe Bottom Flagpole Applications