60 roller chain sprocket

Product features
Single strand sprocket with a single group of teeth around the circumference for applications in which a single chain can support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection using one aspect to accommodate numerous kinds of bushings to greatly help prevent sprocket from slipping on the shaft
Sprocket teeth help prevent slipping and binding to avoid power loss in assemblies
Product description
This Tsubaki roller chain sprocket has a 3/4-inch pitch, fits size 60 chains, and is single strand with one group of teeth around its circumference for use with single strand chains. It is a sort B sprocket with a hub projection encircling the bore on one side, and both hub and bore have Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. One’s teeth of the sprocket assist in preventing slipping and binding in order to avoid power reduction in assemblies. It fulfills International Organization for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket is usually suitable for use in a wide range of applications regarding light to moderate loads and ongoing, high-cycle functions, including vehicle transmission systems, construction and agricultural products, conveyors, and factory production and assembly lines, amongst others.

A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of one tooth to the next is named the pitch, and is often measured in 1/8-in . increments. The sprocket transfers power and motion by a roller chain that is threaded over the teeth of the sprocket. The alignment of the chain with the sprocket’s pitch prevents the chain from slipping so that no power is certainly lost. In the heart of the sprocket may be the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is usually often suited to the sprocket’s hub to customized-suit the sprocket onto a shaft to hold it firmly in place. A hub is certainly a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs using one part are Type B, and sprockets with no hubs are Type A sprockets. For applications requiring sprockets to end up being swapped onto shafts of different diameters, a sprocket with a bore large enough to fit all shafts may be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad range of applications where the drive power of an engine must be transferred into movement, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining tools, aeronautics, robotics and space exploration, amongst others.

U.S. Tsubaki Power Transmission manufactures a number of chains, sprockets, and other power transmission elements that meet International Company for Standardization (ISO) requirements for quality assurance. The company, founded in 1917, is headquartered in Wheeling, IL.

Tags:

China Coupling Co., Ltd.

Mail: [email protected]

As one of leading Couplings manufacturers, suppliers and exporters of mechanical products, We offer Coupling and many other products.
Please contact us for details.

Recent Posts