Split Taper Bushing

Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that’s built for sturdiness and strength. U1 bushings are used in an extensively broad range of applications, which includes; sprockets, shaves, pulleys, gears, and much more, we also offer all of these items. What sets this bushing apart is the high-quality steel engineering along with exact manufacturing and high quality control; this means that you always get yourself a premium quality consistent product. What really models us apart from the other folks is our experienced expert staff members and our company-wide goal of customer satisfaction.
1. Be sure the tapered cone floors of the bushing and the inside of the driven product happen to be clean and free of anti-seize lubricants.
2. Place the bushing in sprocket or various other portion type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing continues to be loose to make sure sliding in shape on shaft.
4. With important on shaft, slide the sprocket or other component type to the required job on the shaft. Be sure to keep the heads of the cap screws available.
5. Align the sprocket or portion type, tighten the screws alternatively and progressively until they will be pulled up tight. Usually do not apply extensions on the wrench handles and don’t allow the sprocket or component to become drawn i contact with flange of bushing. At this time there should be a gap between the bushing flange and sprocket, make sure this gap will not close.
Double split barrel ensures concentricity
Grips the shaft with confident clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or limited by mounting screws
External key on most sizes for great drive and higher torque carrying capabilities
Double-split barrel for confident clamping
Solid flange to maintain concentric bores
Split Taper Bushing china available in inches, metric, and spline bores. Bore range between 3/8″ to 10″
Solid Flange & Double Split Barrel – Assures better concentricity to the shaft.
Key to Key Drive – With keys about both the shaft and product to supply the strongest possible travel.
3/4″ per Foot Taper on Barrel – Self locking taper provides the highest degree of mechanical locking merchandise to product.

Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made from high quality engineered components with superb tolerance. The feature is easy to use and needs no additional alteration. These bushings can match almost all sorts of assemblies and sizes. They are the best choice in design for mechanical connections.
To complete designations put bore size. For instance: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: full selection of both metric and imperial readily available.
Standard range fits up to 125mm/5″ shafts & Hub diameter required will depend on the application.
Complete short reach range readily available, for compact compact assemblies & Clean, Compact Design.
Ease of installation and removal.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and will be purchased on the same page as the pulley you need.
For use with 1 3/16” shaft sizes.
Includes 2 set screws.

Tags:

China Coupling Co., Ltd.

Mail: [email protected]

As one of leading Couplings manufacturers, suppliers and exporters of mechanical products, We offer Coupling and many other products.
Please contact us for details.

Recent Posts