Industry-standard mounting dimensions
Thread-in mounting style
Four gear ratios available (5:1, 10:1, 15:1, 25:1)
Mounting hardware is included for attaching to SureServo motors
Right-angle reducer utilizes a spiral bevel gear; motor can be located at a 90 deg. position from the reducer, offering a more compact footprint
Helical-cut planetary gears for tranquil procedure and reduced vibration
Uncaged needle roller bearings for high rigidity and torque
Adapter bushing connection for simple and effective attachment to most servo motors
High-viscosity, anti-separation grease will not migrate away from the gears; no leakage through the seal
Maintenance free: you don’t need to replace the grease for the life span of the unit
At nominal speed, service life is usually 20,000 hours
Can be positioned in any orientation
Planetary Gear – THE PERFECT Servo Gear System
Planetary Gear Advantages:
High Torque Density
High Stiffness/ Low dropped motion
Suitable for very high speeds
Servomotor with Gearbox:
Reduced load inertia
Lower motor torque required
Smaller engine, lower current ranking, less costly driver
A more compact and economical solution
Right Position Miter Gearbox Standard Features
Dimensions: right angle miter equipment drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile steel. Any shaft may be used as a drive.
Gears: Hardened straight miter gears
Bearings: Hardened metal ball bearings, long term lubrication
Mounting: Three shaft installation positions provide versatility in application
Versatile: Three shaft connections are given for versatility in application
RAB-1 could be operated CW, CCW or Back again driven
RAB-1 is rated in 1/3 HP at 1800 RPM. Maximum acceleration is 3000 RPM
Benefits and COST BENEFITS
Longer service life
Greater tooth-to-tooth contact
The most effective power transfer design under rated load conditions
Stainless shaft (Please specify series stainless needed)
Longer shafts lengths upon input and output
Right Position Drives Made with Advanced Quality Construction
Ever-Power 2-Way Right Position Gearboxes transmit power with tranquil, dependable spiral bevel gears. These superior bevel gearmotors feature hardened spiral bevel gears and nonmagnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also compact and feature multiple mounting choices. The fully enclosed design ensures the integrity of the inner gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Correct Angle 2-Way Gearboxes are designed for maximum strength and heat dissipation. The drives can be found with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We can quote several unique types of shafts as well, including:
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in a huge selection of applications. Any make use of that demands the dependable transfer of rate or power, you could look for a two-method gearbox bearing the Ever-Power brand. The compact design of Ever-Power Two-Way Right-Angle Gearboxes makes them perfect for applications such as for example:
Food Processing Equipment
Ovens & Dryers
Power Transmission Equipment
Ever-Power Inc, providing the most reliable and reliable transfer of power in the marketplace. Our company is known for its innovative styles and producing high-quality movement control solutions designed for engineered efficiency and durability. We offer a range of gearbox styles and a wide selection of versatile shaft couplings to supply you with a full solutions for your mechanical and power tranny applications.
Right Angle Gearbox
Right angle gearboxes are seen as a the actual fact that the drive shaft and the output shaft are organized at an angle of 90 degrees. With respect to the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results in an axis offset.
Right angle gearboxes are recognized with various kinds of gear teeth or a mixture of different gearing types. The most popular single-stage gearbox types are bevel and worm.
Because of the high single stage ratios and the reduced efficiency level, worm gears can perform a self-locking effect. With worm gears additionally it is possible to get a hollow shaft as the drive shaft.
Bevel gearboxes come with different types of gearing. Bevel gearboxes with intersecting axes are recognized using bevel gearing with directly, helical or spiral the teeth. Hypoid gearboxes possess helical bevel gearing with that your axes cross with an axis offset. The bandwidth of technically practical ratios with that your bevel gear stage can be realized is larger with hypoid gearboxes than with the classical bevel gear teeth.
Bevel gearboxes may also be combined with additional gearbox types. A regular app in this respect may be the mixture with a planetary gearbox, whereby the planetary gearbox can be linked upstream or downstream. This results in an array of overall multiplication elements and wide selection of uses in many industrial applications.
The efficiency degree of bevel gearboxes is normally less than that of coaxial spur gearboxes, particularly in comparison to planetary gearboxes. That is because the bevel equipment stage generates a higher degree of axial pressure and radial drive, which has to be absorbed by suitable bearings. This escalates the power loss, which is particularly significant in the drive stage of the gearbox.
The operating noise and the transmittable torques of classic bevel gearboxes are also less than with single spur gear teeth. Hypoid gearboxes, however, are incredibly noisy and will transmit large amounts of torque, but a great deal of bearing load happens in the bevel equipment stage of these gearboxes.
In summarizing, a right angle gearbox is constantly used when the quantity of installation space in the application form is bound, or an angular arrangement between the drive and the output is required by the application. Also, they are used in situations where in fact the input shaft needs to be hollow in order to business lead through lines or use clamping sets.
The benefits of right angle gearboxes:
Use when set up space is limited
Can be combined with other styles of gearbox
Quiet and high degree of torque when using hypoid gearboxes
Version with hollow shaft possible
The disadvantages of right angle gearboxes:
Lower efficiency level than planetary gearbox
Cheaper torques in single-stage ratio range
The Ever-Power, the initial right angle gearbox drive, is more popular and is in use worldwide. The Ever-Power provides manual or power transmitting of rotary movement in a COMPACT, standardized right angle unit.
Our standard line of bevel gearboxes can be found from stock in both an ” and Metric Series, solitary or dual output shafts, 1:one or two 2:1 ratios, and grease lubricated forever and have an operating temperature selection of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Utilizing carburized case-hardened Coniflex* bevel gears, all Ever-Power units employ completely enclosed & sealed ball bearings.
The cast aluminum housings upon our 90 degree gearboxes are precision machined, upon our CNC machining center and coated with a chemical film to safeguard the materials, and use flanged ends and side bosses for compact installation in a wide range of applications.
The shaft materials used for sizes 1, 2 and 3 is #416 stainless steel. On the two 2:1 versions, the pinion shaft is usually carbon metal. For the sizes 4 & 5, the material is dark oxide carbon steel. Shafts can be provided with particular extensions (with flats, splines, holes, etc.) and /or specific lengths upon request.
In addition to your standard models, we will modify our units to meet your design specifications! Our product sales and engineering departments will be ready to assist you together with your specific application requirements.
Over the years we’ve received questions about almost every aspect of the gearbox selection procedure. One of the queries we’ve had several times is, “What is a right-position gearbox or a right-position drive?” Or, more particularly, “How can be a right-angle gearbox or drive different from a rate reducer or other types of gearboxes?”
First, let’s start with some simple terminology. It is not uncommon for the terms “gearbox”, “drive” and “swiftness reducer” to be used interchangeably.
A gearbox is any device that uses a gear train to transmit torque/rpm and anything that uses a gear to transmit torque/rpm is a gearbox.
A right-angle drive is a system with a gear train that may transmit torque/rpm 90 degrees, to carefully turn a corner
A gear reducer is a mechanism with a gear teach that can reduce rpm output. A result of decreasing rpm is raising torque at the same ratio acceleration is reduced.
A gear box may also be a speed increaser
The type of gear used in the apparatus box defines it as the right angle or an inline drive.
A worm gear drive is a right-angle drive because is a bevel gear
A spur equipment drive is inline
A helical gear is inline but can also be a right-angle drive
So, what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It can be a 1 to at least one 1 ratio or a multiple of 1 1 such as 2:1 or 15:1. If the ratio is 1:1 it is a right-position drive. If the ratio is usually greater than 1:1 it really is a right-angle rate reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outdoors contaminants for smooth operation
Right- or left-hands rotation to convert power either direction
Quickly slides axially along the drive or driven shaft for flexible positioning
Alloy metal helical gears for high performance
Built-in 5 sizes with 3 types of result shaft : hollow, projecting or double-extended. Moreover, yet another output shaft can be installed opposite to the insight shaft.
Three input types can be found : with projecting input shaft, with pre-designed motor coupling (bell and joint) and pre-engineered Small motor coupling.
Gear device body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined upon all areas for easy positioning. The single lubrication chamber guarantees improved warmth dissipation and better lubrication of all the internal components.
The mechanism of the gearboxes consists of two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 made of steel.
The use of top quality bearings on all of the axis ensures long life to the gearbox and allows very high radial and axial loads.
Gearbox casing, flanges, bells and covers are externally painted with BLUE RAL 5010.