Greenhouse gear motor

The EP Greenhouse geared motor is a compact and lightweight reduction gearbox with a built-in limit switch system that is ideal for assembly of a locally available electric engine. The gearbox can be used in manually-controlled or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gearbox can be rainproof and windproof. The geared motor has a high protection course (IP65) and can be utilized in an ambient temperature of 0-60 °C.

The low-noise gear reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is definitely locked when the reduction gearbox isn’t running. The completely sealed reduction geared motor has an growth chamber with a diaphragm to keep the gear oil at a low pressure under all conditions, even at high temps. Thanks to the utilization of an growth chamber, the geared motor could be installed in any placement. There are no restrictions, because there is no dependence on a bleed plug. The sealed reduction gearbox keeps the apparatus essential oil of the gear motor in ideal condition for its entire operating lifetime. The gear reducer is ideal for discontinuous use, working class s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction gearbox comes with an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an included chamber and is definitely enclosed by an impact-resistant plastic-type cover. The limit change system is obtainable and easy to adjust. The limit switch system’s optimum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear driver has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear motor for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 mins.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).

Tags:

China Coupling Co., Ltd.

Mail: [email protected]

As one of leading Couplings manufacturers, suppliers and exporters of mechanical products, We offer Coupling and many other products.
Please contact us for details.

Recent Posts